Email

How to use the Fusion Digital Power Designer with UCD90x Sequencers

The Fusion Digital Power Designer is a PMBus based guided user interface (GUI) that allows users to configure TI’s family of UCD90X digital sequencers. This training series walks designers through how to work with the GUI to configure their UCD90X devices, and then manage and monitor their system accordingly.

1. Getting Started

This section explains how to connect the EVMs and download, install, and launch the Fusion Digital Power Designer.
# Title Duration
1.1 UCD90x: Getting started with the Fusion Power Designer
Learn how to get started using the Fusion Digital Power Designer.
02:28
1.2 Fusion Power Designer: Download the GUI
How to download the Fusion Digital Power Designer.
00:45
1.3 Fusion Power Designer: Installing the GUI
How to install the Fusion Digital Power Designer.
00:45
Login required

2. Using the Fusion Digital Power Designer

The Fusion Digital Power Designer is packed with features. Explore below to learn how to use them all.
# Title Duration
2.1 Fusion Power Designer: Configure a voltage rail
How to configure a voltage rail in the Fusion Digital Power Designer.
02:09
2.2 Fusion Power Designer: Configure set points for a voltage rail
How to configure set points for a voltage rail in the Fusion Digital Power Designer.
01:19
2.3 Fusion Power Designer: Add and configure a GPI input
How to add and configure a GPI input in the Fusion Digital Power Designer.
02:19
2.4 Fusion Power Designer: Add additional voltage rails
How to add additional voltage rails in the Fusion Digital Power Designer.
02:11
2.5 Fusion Power Designer: Set rail sequencing
Set rail sequencing int he Fusion Digital Power Designer
03:05
2.6 Fusion Power Designer: Set fault response
Set fault response using the Fusion Digital Power Designer.
01:49
2.7 Fusion Power Designer: Set up a margining function
How to set up a margining function in the Fusion Digital Power Designer.
01:09
2.8 Fusion Power Designer: Add a logic-controlled GPO
How to add a logic-controlled GPO in the Fusion Digital Power Designer.
01:34
2.9 Fusion Power Designer: Configure a rail to monitor current
How to configure a rail to monitor current in the Fusion Digital Power Designer.
02:00
2.10 Fusion Power Designer: Configure a rail to monitor temperature
Configure a rail to monitor temperature in the Fusion Digital Power Designer
01:26
2.11 Fusion Power Designer: Enable or disable a fault log
Enabling and disabling fault logs in the Fusion Digital Power Designer.
00:43
2.12 Fusion Power Designer: Setup a system reset function
Set up a system reset function in the Fusion Digital Power Designer.
01:17
2.13 Fusion Power Designer: Set up the system watchdog function
How to set up the system watchdog function in the Fusion Digital Power Designer.
01:22
2.14 Fusion Power Designer: Pin Selected Rail States
Using the pin selected rail states portion of the Fusiong Digital Power Designer.
02:19
2.15 Fusion Power Designer: Set up security mode
How to set up security mode in the Fusion Digital Power Designer.
01:50
2.16 Fusion Power Designer: Error checking function
How to use the error checking function in the Fusion Digital Power Designer.
01:00
2.17 Fusion Power Designer: Import and export system files
Import and export system files in the Fusion Power Designer.
01:08
2.18 Fusion Power Designer: How to import and export data flash script files
How to import and export data flash script files within the Fusion Digital Power Designer.
02:02
2.19 Fusion Power Designer: Import and export project files
Import and export project files using the Fusion Digital Power Designer
01:06
2.20 Fusion Power Designer: Import and export data flash hex files
Import and export data flash hex files using the Fusion Digital Power Designer.
01:52
2.21 Fusion Power Designer: Compare different project files
Compare different project files in the Fusion Digital Power Designer.
01:24
2.22 Fusion Power Designer: Rail monitor function
Using the rail monitor function in the Fusion Digital Power Designer.
00:56
2.23 Fusion Power Designer: Status function
Using the status function in the Fusion Digital Power Designer
01:10
2.24 Fusion Power Designer: System monitor function
Using the system monitor function in the Fusion Digital Power Designer
01:20
2.25 Fusion Power Designer: Using the UCD90xxx Device GUI
Using the UCD90xxx Device GUI
01:03
2.26 Fusion Power Designer: Low level I2C SMBus debugger
Using the low level I2C SMBus debugger in the Fusion Digital Power Designer.
01:05
2.27 Fusion Power Designer: Change dongle settings
How to change the USB to GPIO dongle settings in the Fusion Digital Power Designer.
00:56
2.28 Fusion Power Designer: How to upgrade dongle firmware
How to upgrade the USB to GPIO dongle firmware in the Fusion Digital Power Designer.
01:01
Login required
arrow-topclosedeletedownloadmenusearchsortingArrowszoom-inzoom-out arrow-downarrow-uparrowCircle-leftarrowCircle-rightblockDiagramcalculatorcalendarchatBubble-doublechatBubble-personchatBubble-singlecheckmark-circlechevron-downchevron-leftchevron-rightchevron-upchipclipboardclose-circlecrossReferencedashdocument-genericdocument-pdfAcrobatdocument-webevaluationModuleglobehistoryClockinfo-circlelistlockmailmyTIonlineDataSheetpersonphonequestion-circlereferenceDesignshoppingCartstartoolsvideoswarningwiki