Filters in use:
Filters in use:
Filters in use:
Filters in use:
Filters in use:
Sort by:
How to use the Sitara Clock Tree Tool in 5 minutes or less!
Date:
Duration:
January 21, 2016
Duration:
05:41
The Clock Tree Tool (CTT) provides information about the clocks and modules in Sitara devices.
Linux Board Porting Series - Module 1 - Introduction
Date:
Duration:
October 14, 2013
Duration:
02:28
Module 1 - Introduction: This 3-minute presentation provides an overview of "Linux Board Porting" online series.
Linux Board Porting Series - Module 2 - Linux Board Port Overview
Date:
Duration:
August 11, 2015
Duration:
11:58
Module 2 - Linux Board Port Overview: Overview of the process of porting Linux and U-boot from a standard TI development platform to the developer's custom hardware.
Linux Board Porting Series - Module 3 - Linux Boot Process
Date:
Duration:
August 24, 2015
Duration:
08:10
Module 3 - Linux Boot Process: Overview of the process of booting Linux on an embedded Arm Cortex device.
Linux Board Porting Series - Module 4 - Linux/U-boot Source Code Structure
Date:
Duration:
August 17, 2015
Duration:
11:21
Module 4 - Linux/U-boot Source Code Structure: Overview of the layered organization of the source code files for both Linux and U-boot, focusing on those files which are most pertinent to a typical board porting effort.
Linux Board Porting Series - Module 5 - Installing Code Composer Studio
Date:
Duration:
August 17, 2015
Duration:
09:39
Module 5 - Installing Code Composer Studio: This first lab exercise of the series is a recording of the presenter installing Code Composer Studio. In particular, installation of the proper JTAG drivers and a valid CCS license are required to debug U-boot. This is the first of three lab exercises centered around debugging U-boot using JTAG.
Linux Board Porting Series - Module 6 - Building U-boot in CCS
Date:
Duration:
August 17, 2015
Duration:
08:09
Module 6 - Building U-boot in CCS: This lab exercise shows the user how to set up a makefile-based project in Code Composer Studio in order to rebuild u-boot from source code.
Linux Board Porting Series - Module 7 - Debugging U-boot with JTAG in CCS
Date:
Duration:
August 17, 2015
Duration:
26:24
Module 7 - Debugging U-boot with JTAG in CCS: This module is a recording of the presenter using Code Composer Studio and an xds560 emulator to debug U-boot on the Beaglebone Black platform.
Linux Board Porting Series - Module 8 - Installing SDK and Building Kernel with Debug Symbols
Date:
Duration:
August 17, 2015
Duration:
16:13
Module 8 - Installing SDK and Building Kernel with Debug Symbols: This module is a recording of the presenter installing the Sitara Software Development Kit (SDK) and rebuilding the Linux Kernel with Debugging Symbols. It is the first of three modules demonstrating the debugging of the Linux Kernel in Code Composer Studio using JTAG.
Linux Board Porting Series - Module 9 - Booting Linux from MMC/SD Card and TFTP
Date:
Duration:
August 17, 2015
Duration:
11:32
Module 9 - Booting Linux from MMC/SD Card and TFTP: This module is a recording of the presenter using the SDK utility to build a bootable MMC/SD card for the AM335x starter kit and modifying the card to load the Linux Kernel from a TFTP server.
Linux Board Porting Series - Module 10 - Debugging Linux Kernel with JTAG in CCS
Date:
Duration:
August 17, 2015
Duration:
12:27
Module 10 - Debugging Linux Kernel with JTAG in CCS: This module is a recording of the presenter configuring JTAG debugging of the Linux Kernel using Code Composer Studio. It is the final in a ten-part series.
KeyStone I training: antenna Interface V2 (AIF2)
Date:
Duration:
November 9, 2010
Duration:
01:17:03
Antenna Interface V2 (AIF2) provides an overview of the architecture and features of AIF Version 2.
KeyStone I training: bootloader overview
Date:
Duration:
November 9, 2010
Duration:
20:54
This training provides an overview of the bootloader used by the KeyStone I architecture devices.
KeyStone I training: debug overview
Date:
Duration:
November 9, 2010
Duration:
42:10
Debug Overview introduces the C66x debug features including triggers, statistics, and traces.
KeyStone I training: C66x CorePac overview - achieving high performance
Date:
Duration:
October 9, 2010
Duration:
31:03
CorePac: Achieving High Performance discusses how high performance can be achieved within each DSP core. Topics include CorePac architecture, Single Instruction Multiple Data (SIMD), memory access, and software pipelining.
KeyStone I training: fast fourier transform coprocessor (FFTC)
Date:
Duration:
November 9, 2010
Duration:
25:22
Fast Fourier Transform Coprocessor (FFTC) presents the architecture and features of the FFT Coprocessor.
KeyStone I training: I/O interfaces
Date:
Duration:
November 9, 2010
Duration:
22:05
I/O Interfaces provides an overview of selected external interfaces on the C66x devices including UART, I2C, SPI, TSIP and EMIF-A.
KeyStone I training: instruction set architecture (ISA)
Date:
Duration:
March 9, 2015
Duration:
30:57
C66x Instruction Set Architecture describes the differences between the TMS320C674x instruction set architecture and the TMS320C66x instruction set included in the KeyStone CorePac.
KeyStone I training: introduction to interprocessor communication (IPC)
Date:
Duration:
November 9, 2010
Duration:
40:28
Introduction to Interprocessor Communication (IPC) provides an overview of the hardware and software that transports data and/or signals between threads of execution in the KeyStone family of C66x multicore devices.
KeyStone I training: memory and cache
Date:
Duration:
November 9, 2010
Duration:
01:01:07
CorePac & Memory Subsystem provides a detailed look at the C66x memory subsystem including the Multicore Shared Memory Controller (MSMC), local & shared memory/cache control, extended memory, and memory protection.