EMI (electromagnetic interference) mitigation is a critical step in the design process in most electronic systems, and especially so in the automotive world. In many cases, automotive OEM emissions requirements are even more stringent than both national and international standards bodies like the FCC. Unfortunately, by their nature, switching regulators are sources of EMI; but, in order to keep power supply designs small and efficient, switchers are a critical component. So how can you reap the benefits of a switching regulator while still meeting challenging EMI requirements?
The mmWave training curriculum provides foundational content and hands on examples for you to learn the fundamentals of FMCW technology and mmWave sensors, and start development quickly. TI's portfolio of mmWave sensors features the AWR automotive radar sensor family and the IWR industrial mmWave sensor family, which are intended to be used for detecting range, velocity and angle of objects. Learn more about the silicon, tools, software and some of the applications for both mmWave families in the mmWave training series.
The DS90UB953/954 System Design & Operation video series offers training for FPD-Link III devices for ADAS. FPD-Link III devices such as the DS90UB953-Q1/ DS90UB954-Q1 support sensor use over serial link for Advanced Driver Assist Systems (ADAS) in the automotive industry. In this training series, we will guide you through step-by-step procedures to initialize and bring-up the “Sensor-Serializer-Deserializer-ISP” link to an optimal performance level.
The FPD-Link Learning Center is a comprehensive online classroom for system designers integrating FPD-Link serializer/deserializer technology into their ADAS or infotainment applications. The on-demand curriculum offers subject matter, from basics to advanced, to widen the technical knowledge of experienced engineers as well as assist those who are just starting to design with FPD-Link serializers and deserializers.
TI's Jacinto TDA2/TDA3 System-on-Chip (SoC) family offers scalable and open solutions based on a heterogeneous hardware and common software architecture for Advanced Driver Assistance System (ADAS) applications including camera-based front (mono/stereo), rear, surround view and night vision systems in addition to multi-range radar and sensor fusion systems.
This training series provides an overview of the evaluation and development platforms as well as getting started with the software and development tools offered by TI on the Jacinto TDA2/TDA3 processors.
New to mm-wave sensing? This series of five short videos provides a concise yet in-depth introduction to sensing using FMCW radars.
Labs are follow-along training videos that walk you through installation, building, and running examples of mmWave sensor projects.
This introduction video will give the background on FPD-Link III devices, such as the DS90UB953-Q1/ DS90UB954-Q1; the device's role within Advanced Driver Assist Systems (ADAS) in the automotive industry; and explain their broad appeal to engineers of all experience levels. This is fundamental to diving deeper into a 953/954 system, as well as, the links within the system.
This section frames the design and operation video series by showing why it is important to contextualize customer problems in terms of the links between the devices.
Specifically, this section will discuss: issues with initializing the camera and issues with reading the incorrect serializer ID from the deserializer.
Understanding what hardware and software settings are important is critical to establishing a foundation for the 953/954 system. These settings can occur during or after power up and may need to be changed via software. As a result, these settings are routinely checked and verified before checking any of the other links in the system.
Specifically, this sections discusses: Diagnostics post power up, Mode and IDX Pins, Clocking Modes between the 953/954, Aliasing, I2C Pass Through, Port selection on 954, Analog Launch Pad (ALP), and Successful I2C Communication
This section analyzes the link between the 953 and 954 and establishes how to identify the health and operation of the link. Since the link between the 953-954 is the most fundamental link used to communicate between devices, it is often checked first.
Specifically, this section discusses: Back Channel configuration, Built in Self Test (BIST), Adaptive Equalization (AEQ), and Channel Monitor Loop (CMLOUT)
This section discusses what frame synchronization (FrameSync) is and how to configure in on the 953 and 954 and how CSI2 data is transferred across the link from the 954 to the ISP/SoC
Specifically, this section discusses: Frame Synchronization (FrameSync), Controlling 953 GPIOs locally and remotely via I2C, Unsynchronized and synchronized sensors, Internal and External Frame Sync, Port Forwarding, Accessing Indirect Registers, and Pattern Generation on 953 & 954
This section discusses how design a 953/954 using Power over Coax (PoC), and various hardware checks and concepts that need to be considered when analyzing a 953/954 system.
Specifically, this section discusses: Power Over Coax (PoC), AC Coupling Capacitors, PoC Inductors, Typical PoC Schematic, Critical Signal Routing, I2C Pullups, Loop Filter Capacitors on 953, Insertion Loss, Return Loss, and Time Domain Reflection (TDR) measurements.
These introduction videos describe the evolution of FPD-Link product families, and introduction to FPD-Link III SerDes for use in Infotainment and ADAS applications.
This video series provides an overview of diagnostic capabilities of FPD-Link III and basic tips to simplify troubleshooting.
This video series describes the key parameters used in the FPD-Link high-speed serial link consisting of the serializer, transmission medium and the de-serializer.