2Introduction to Analog-to-Digital Converters (ADCs) (2)
These videos describe the key specifications listed in an analog-to-digital converter data sheet.
3Analog-to-Digital Converter (ADC) Drive Topologies (6)
These videos describe the different types front-end topologies that can be used to drive the input signal of an ADC.
4Error Sources (3)
These videos describe how to calculate error and noise of analog-to-digital converters (ADCs).
5ADC Noise (7)
This covers analysis, simulation, and measurement of ADC noise for delta sigma and SAR devices.
6AC Specifications (5)
These videos describe how to analyze analog-to-digital converter (ADC) performance specifications that are measured using ac input signals.
7SAR ADC Input Driver Design (7)
These videos describe how to design the input driver circuitry for a successive approximation register analog-to-digital converter (SAR ADC).
8Driving the Reference Input on a SAR ADC (6)
This section covers SAR voltage reference specifications, reference behavior, and methods for driving the reference input that minimize error.
10Electrical Overstress on Data Converters (7)
This series covers methods for protecting a system with an ADC with external components and how to minimize the impact of protection components on performance.
11High-Speed Analog-to-Digital Converter (ADC) Fundamentals (7)
These videos cover the fundamentals of high-speed data converters, including an overview of the architectures of both ADCs and DACs.